Specification:
OEM:5W7Z9F593AA
Applicable Models:
FORD BRONCO V8 5.0L/5.8L 1990-1996
FORD CROWN VICTORIA V8 4.6L 1992-1997
FORD E-150 V8 5.4L 1990-2004
FORD E-250 V8 5.4L 1990-2004
FORD E-350 V8 5.4L 1990-2004
FORD E-450 V8 5.4L 2000-2003
FORD ECONOLINE SUPER DUTY V8 5.8L/7.5L 1996-1998
FORD EXCURSION V8 5.4L 2000-2005
FORD EXPEDITION V8 4.6L/5.4L 1997-2002
FORD F-150 V8 4.6L/5.4L 1989-2003
FORD F-250 V8 5.4L 1989-1999
FORD F-250 SUPER DUTY V8 5.4L 1999-2003
FORD F-350 V8 5.4L 1989-1997
FORD F-350 SUPER DUTY V8 5.4L 1999-2003
FORD MUSTANG V8 4.6L 1996-2004
FORD THUNDERBIRD V8 4.6L 1994
LINCOLN NAVIGATOR V8 5.4L 1998-1999
LINCOLN TOWN CAR V8 4.6L 1991-1994
MERCURY COUGAR V8 4.6L 1994
MERCURY GRAND MARQUIS V8 4.6L 1992-1997
Installation:
Step 1: The metal rod over the fuel injectors is the fuel rail. Use the socket and ratchet to remove the bolts and brackets holding the fuel rail in place.
Step 2: Make sure the engine is cold enough to touch. Disconnect the battery.Remove plastic engine covers using appropriate socket. Set covers aside.
Step 3: Use pliers to disconnect the electrical connector on each injector.
Step 4: Lift the fuel rail off of the intake manifold, bringing the injectors with it.
Step 5: Examine the injector. If you see a small metal clip that looks like a staple, use a small flathead screwdriver to remove or depress the clip. Then grasp the injector and work back and forth while pulling to remove from the fuel rail. The injector and rail will drip, so have shop towels ready.
Step 6: Press the injector into the rail until it stops. Attach the metal clip, if equipped. Reattach the fuel rail. Line up all the injectors over their respective holes, then press each injector until they slide into place.
Step 7: Bolt down fuel rail. Reattach fuel line. Plug in fuel injector electrical connections. Reconnect battery.
Step 8: Turn the key to the on position and wait 10 seconds then check all the injectors for fuel leaks before turning to engine start. After the engine drops to the normal idle RPM, turn the engine off. Check all the injectors for fuel leaks again.
Description:
Material : Fuel Injector Nozzle made of ABS material, which is more wear-resistant, corrosion-resistant, durable and has a long service life , Make your vehicle work more efficiently.
Performance : Fuel atomized particles to improve engine fuel economy;protection to remove impurities and optimize engine performance.
Easy to install:fast response, stable performance, close to original effect.Direct replacements of your old injectors and no modification needed.
Service:Before buying, please make sure to compare with the product picture or OE number. If you have any questions, please contact us.We will reply you as soon as possible.