Specification:
OEM:68011710AA
Applicable Models:
DODGE SPRINTER 2500 V6 3.5L 2007-2008
DODGE SPRINTER 3500 V6 3.5L 2007-2008
MERCEDES-BENZ C230 2006-2007
MERCEDES-BENZ C300 2008-2012
MERCEDES-BENZ C350 2006-2011
MERCEDES-BENZ CL550 2007-2010
MERCEDES-BENZ CLK350 2006
MERCEDES-BENZ CLK550 2007-2009
MERCEDES-BENZ CLS550 2007-2011
MERCEDES-BENZ E350 2006-2011
MERCEDES-BENZ E550 2007-2011
MERCEDES-BENZ G500 2010-2011
MERCEDES-BENZ G550 2009-2015
MERCEDES-BENZ GL450 2007-2012
MERCEDES-BENZ GL500 2010-2011
MERCEDES-BENZ GL550 2008-2012
MERCEDES-BENZ GLK350 2010-2012
MERCEDES-BENZ ML350 2006-2011
MERCEDES-BENZ ML450 2010-2011
MERCEDES-BENZ ML550 2008-2011
MERCEDES-BENZ R350 2006-2011
MERCEDES-BENZ S400 2010-2013
MERCEDES-BENZ S550 2007-2011
MERCEDES-BENZ SL550 2007-2012
MERCEDES-BENZ SLK280 2006-2008
MERCEDES-BENZ SLK300 2009-2011
MERCEDES-BENZ SLK350 2005-2011
Installation:
Step 1: The metal rod over the fuel injectors is the fuel rail. Use the socket and ratchet to remove the bolts and brackets holding the fuel rail in place.
Step 2: Make sure the engine is cold enough to touch. Disconnect the battery.Remove plastic engine covers using appropriate socket. Set covers aside.
Step 3: Use pliers to disconnect the electrical connector on each injector.
Step 4: Lift the fuel rail off of the intake manifold, bringing the injectors with it.
Step 5: Examine the injector. If you see a small metal clip that looks like a staple, use a small flathead screwdriver to remove or depress the clip. Then grasp the injector and work back and forth while pulling to remove from the fuel rail. The injector and rail will drip, so have shop towels ready.
Step 6: Press the injector into the rail until it stops. Attach the metal clip, if equipped. Reattach the fuel rail. Line up all the injectors over their respective holes, then press each injector until they slide into place.
Step 7: Bolt down fuel rail. Reattach fuel line. Plug in fuel injector electrical connections. Reconnect battery.
Step 8: Turn the key to the on position and wait 10 seconds then check all the injectors for fuel leaks before turning to engine start. After the engine drops to the normal idle RPM, turn the engine off. Check all the injectors for fuel leaks again.
Description:
Material : Fuel Injector Nozzle made of ABS material, which is more wear-resistant, corrosion-resistant, durable and has a long service life , Make your vehicle work more efficiently.
Performance : Fuel atomized particles to improve engine fuel economy;protection to remove impurities and optimize engine performance.
Easy to install:fast response, stable performance, close to original effect.Direct replacements of your old injectors and no modification needed.
Service:Before buying, please make sure to compare with the product picture or OE number. If you have any questions, please contact us.We will reply you as soon as possible.