Specification:
OEM:06A906031CT
Applicable Models:
Audi Seat Skoda 1.6 Petrol
2003-2012 Audi A3 1.6
2004/06-2013/06 Skoda Octavia 1Z3 1.6
2004/04-2016/12 Caddy III Kasten 2KA, 2KH, 2CA, 2CH 1.6
2011/05-2016/12 Caddy III Kasten 2KA, 2KH, 2CA, 2CH 1.6 Bi-Fuel
2004/04-2016/12 Caddy III Kombi 2KB, 2KJ, 2CB, 2CJ 1.6
2011/05-2016/12 Caddy III Kombi 2KB, 2KJ, 2CB, 2CJ 1.6 Bi-Fuel
2005/05-2013/12 Golf Plus 5M1, 521 1.6
2009/05-2013/12 Golf Plus 5M1, 521 1.6 Bi-Fuel
2007/11-2013/12 Golf Plus 5M1, 521 1.6 MultiFuel
2004/01-2008/11 Golf V 1K1 1.6
2007/10-2008/11 Golf V 1K1 1.6 MultiFuel
2007/06-2009/07 Golf V Variant 1K5 1.6
2007/11-2009/07 Golf V Variant 1K5 1.6 MultiFuel
2005/10-2010/10 Jetta III 1K2 1.6
2008/01-2010/10 Jetta III 1K2 1.6 MultiFuel
2003/07-2010/05 Touran 1T1, 1T2 1.6
Installation:
Step 1: The metal rod over the fuel injectors is the fuel rail. Use the socket and ratchet to remove the bolts and brackets holding the fuel rail in place.
Step 2: Make sure the engine is cold enough to touch. Disconnect the battery.Remove plastic engine covers using appropriate socket. Set covers aside.
Step 3: Use pliers to disconnect the electrical connector on each injector.
Step 4: Lift the fuel rail off of the intake manifold, bringing the injectors with it.
Step 5: Examine the injector. If you see a small metal clip that looks like a staple, use a small flathead screwdriver to remove or depress the clip. Then grasp the injector and work back and forth while pulling to remove from the fuel rail. The injector and rail will drip, so have shop towels ready.
Step 6: Press the injector into the rail until it stops. Attach the metal clip, if equipped. Reattach the fuel rail. Line up all the injectors over their respective holes, then press each injector until they slide into place.
Step 7: Bolt down fuel rail. Reattach fuel line. Plug in fuel injector electrical connections. Reconnect battery.
Step 8: Turn the key to the on position and wait 10 seconds then check all the injectors for fuel leaks before turning to engine start. After the engine drops to the normal idle RPM, turn the engine off. Check all the injectors for fuel leaks again.
Description:
Material : Fuel Injector Nozzle made of ABS material, which is more wear-resistant, corrosion-resistant, durable and has a long service life , Make your vehicle work more efficiently.
Performance : Fuel atomized particles to improve engine fuel economy;protection to remove impurities and optimize engine performance.
Easy to install:fast response, stable performance, close to original effect.Direct replacements of your old injectors and no modification needed.
Service:Before buying, please make sure to compare with the product picture or OE number. If you have any questions, please contact us.We will reply you as soon as possible.